The Speroni APM 100 is a Well Jet Self Priming Pump, jet pump and is great for draining water from  wells. This pump is also suitable for use with domestic fittings with small to medium sized tanks.

Made in Italy.

Installation Example

Features

The separate ejector pump is basically a centrifuge with a possibility of becoming a self-priming jet pump with deep suction by fitting the ejector in the well onto the end of the suction pipe. Recirculation of water passing through the Venturi attracts water from below and pushes it through the return (suction) pipe creating enough pressure to take it up to the surface. For these deep suction applications two pipes need to be connected: the delivery pipe to the ejector and the return (suction) outlet, in this case the diameter of the well must be at least 4″.

Operating Conditions

• Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
• Temperature max. liquid: 95°F (for other uses)
• Ambient temperature up to 104°F
• Total suction lift up to 114ft.
• Standard ejector P30

Motor

• Two-Pole induction motor (n = 3450 min-1)
• Insulation Class F
• Protection IP 55

Materials

• Pump body: Cast Iron
• Motor support: Cast Iron
• Impellers: Noryl
• Diffuser: Noryl
• Ejector: Cast Iron
• Shaft with rotor: Stainless Steel AISI 304
• Mechanical seal: Ceramic/Graphite/NBR

Technical Specifications

Dimensions

Performance Table